Toro Reelmaster 3575-D (03821)

#### Overview The Reelmaster 3575-D 7-inch reel mower provides productivity, efficiency, and simplicity. The 100 inch width of cut and lighter weight makes it perfect for sports fields and fairways. This mower was designed to be over 20% lighter and much more compact than traditional Toro reel mowers. You get the performance you come to expect from Toro in a size that is not only highly maneuverable, but is also engineered to decrease turf compaction. #### Specifications Armrests Standard Battery 12V Bedknife Adjustment Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment. Blade Style/Type Reel Blade Type (Description) EdgeSeries DPA radial or forward swept reels. Cab Unit N/A Clip Frequency/Backlapping 7" reel 1,600 rpm max reel speed, at highest setting. 200 rpm max at low idle and lowest setting for backlapping. Controls Foot operated controls: Forward and reverse traction pedal, mow/transport speed limiter. Hand operated on control panel: Parking brake lever, ignition switch, engine throttle lever, LED headlight switch, on/off switch for cutting units, joystick for cutting unit lift and lower. Other controls: Steering wheel tilt control, reel speed control, backlap engagement lever. Cooling System Description Aluminum side-by-side oil cooler/radiator. 8.5 fins per inch, wavy fin, non-louvered. 5.25 quart (4.9 liter) capacity. Cup Holder Standard Cutting Unit Accessories Rear Roller Brush Kit, Universal Groomer, Broomer, Grass Baskets Cutting Unit Lift/Lower Hydraulic - front and rear cutting unit lift/lower are sequenced for uniform starting and ending points. Cutting Unit Type/Configuration Five hydraulically driven, balanced, DPA cutting Units. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance. Drivetrain Diesel Electrical System Heavy-duty 12-volt battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities. Engine Cooling Liquid Cooled Fuel / Power Source Diesel / Biodiesel Fuel Capacity 7.5 U.S. gal. (28.4 L) Fuel Filter 10 micron spin-on filter with integral water separator. Gauges/Instrumentation Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off). Ground Speed - Forward 0 - 10 mph (0 - 16.1 km/h) Ground Speed - Reverse 0 - 3.5 mph (0 - 5.6 km/h) Height 81" (206 cm) Height of Cut Range 8-Blade: 0.5"-2.0" (13 mm - 51 mm) 11-Blade: 0.25"- 0.75" (6 mm - 19 mm) Hydraulic Fluid Capacity 6 U.S. gal. (22.7 L) Hydraulic Fluid Type Toro PX Extended Life Hydraulic Fluid IntelliDash Capable Yes Interlocks Traction pedal neutral, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches. Lighting Standard Main Frame/Chassis Formed steel, welded steel and steel tubing. Max Slope Angle Refer to operator's manual. Mowing Speed 0 - 7 mph (0 - 11.3 km/h) Number of Blades 11, 8 Oil Capacity 3.5 U.S. qt. (3.3 L) Oil Cooler Description Pressurized lubrication system. Optional Accessories Sunshade (with optional operator cooling fan, LED work lights, rotating amber beacon) Overall Width 112" (274 cm) Parking/Service Brakes Hydrostatic service brake. Hand-operated parking brake. Power Steering Yes Power Train (Engine Description) Kubota liquid-cooled diesel engine, 3-cylinder, 24.8 hp (18.5 kW) @ 3000 RPM. Engine governed to 3220 RPM high idle (± 50 RPM), 1400 RPM low idle (± 50 RPM). Displacement: 68.5 cu.in. (1123 cc). Peak torque: 57.2 lbs-ft @ 2200 RPM. Tier 4 and Stage V compliant. Product Length 105" (266 cm) Reel Diameter 7 in. (17.8cm) Reel/Cylinder Drive Hydraulic Rollers Wiehle front roller and standard rear roller included. Optional front full and shoulder rollers, and short and long rear rollers available. Safety/Operator Safety 2-post ROPS and retractable seat belts standard. Seat Mechanical suspension standard. Starting Switch Steering System Description Hydraulic power steering, tilt wheel. Tires - Front 22" x 12" - 12", 4-ply, No Tread Tires - Rear 22" x 12" - 12", 4-ply, No Tread Tool Box Standard Traction Drive 3WD Traction Drive (System) Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in forward and reverse. Transport Width 91" (231 cm) Weight 1,755 lbs. (796 kg) with no cutting units. 2,550 lbs. (1,156 kg) with (5) 5" reels, 22" width, 8-blade cutting units. Width of Cut 100" (254 cm)